On this page, we have shared the download link and guide to install the Samsung SM-G990U (US Carrier Galaxy S21 FE 5G) firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here you will find all stock firmware zip files for all the supported regions with Samsung SM-G990U.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Also Read

Samsung Galaxy S21 FE 5G Unlock Bootloader Guide | How to

How To Root Samsung Galaxy S21 FE 5G Using Magisk [No TWRP needed]

Will Samsung Galaxy S21 FE 5G Get Android 13 (One UI 5.0) Update?

Fix: Samsung S21 FE 5G Touch Screen Not Working

Fix: Samsung S21 FE 5G GPS Problem or Not Accurate

Samsung Galaxy S21 FE 5G SM-G990U (US Carrier) Firmware Flash Files:

Steps to Flash Firmware File on Galaxy S21 FE 5G SM-G990U

Before we get straight to the steps to Install Stock Firmware on your US Carrier Galaxy S21 FE 5G, let us take a look at the pre-requirements first.

Pre-Requirements: 

  • This Guide is for Samsung Galaxy S21 FE 5G SM-G990U (US Carrier)
  • You need a Windows PC/Laptop and a USB cable to flash the firmware.
  • Charge your device with a minimum of 50% battery backup.
  • You have to download the latest Samsung USB Drivers and install them on your PC.
  • Make sure that you have ODIN Software installed on your PC.
  • Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at Steps to flash Stock ROM on Samsung Galaxy S21 FE 5G.

Installation Guide

  • Download the Samsung SM-G990U flash file
  • Extract the contents of the firmware flash file zip.
  • Launch the ODIN application
  • Load the firmware files in their appropriate section
  • Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
  • Notice that the CO port will light up on Odin once you connect your phone.
  • Click the Start button to install the firmware on your Samsung device.
  • That’s it! You will see a PASS message once the installation is complete.

Check out our full-depth video guide as well.

Disclaimer:

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.