Samsung Galaxy A52s 5G was finally launched in India that features a 120Hz AMOLED display and Dolby Atmos sound with its stereo speakers. The camera on the device sports a quad rear camera setup that includes a 64 MP primary sensor, a 12 MP secondary sensor, a 5-megapixel macro shooter and a 5-megapixel telephoto sensor.

In this tutorial, we will guide you on how to install the Samsung SM-A528B (Galaxy A52s 5G) Binary 1 U1 flash file using the Samsung flash tool (also known as the ODIN flash tool). On this page, you will find the official stock firmware file for the Samsung Galaxy A52s 5G SM-A528B, drivers, and flash tool.

By flashing the Stock ROM file, you can always fix the device software issue such as boot loop, lag, soft brick or hard brick, remove pattern lock, FRP lock, and many more.

Also Read

Samsung A52s 5G SM-A528B FRP Bypass | Use EFT, CM2, UMT

How To Root Samsung A52s 5G SM-A528B Using Magisk [No TWRP needed]

Will Samsung Galaxy A52s 5G Get Android 13 (One UI 5.0) Update?

Fix: Samsung Galaxy A52S 5G No SIM Card Detected Error

Samsung Galaxy A52s 5G SM-A528B U1 Firmware Flash Files:

Steps to Install Firmware File on Samsung Tab A7 Lite SM-A528B

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy A52s 5G, let us take a look at the pre-requirements first.

Pre-Requirements: 

  • This Guide is for Samsung Galaxy A52s 5G SM-A528B
  • You need a Windows PC/Laptop and a USB cable to flash the firmware.
  • Charge your device with a minimum of 50% battery backup.
  • You have to download the latest Samsung USB Drivers and install them on your PC.
  • Make sure that you have ODIN Software installed on your PC.
  • Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at Steps to flash Stock ROM on Samsung Galaxy A52s 5G.

Installation Guide

  • Download the Samsung SM-A528B firmware flash file
  • Extract the contents of the firmware flash file zip.
  • Launch the ODIN application
  • Load the firmware files in their appropriate section
  • Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
  • Notice that the CO port will light up on Odin once you connect your phone.
  • Click the Start button to install the firmware on your Samsung device.
  • That’s it! You will see a PASS message once the installation is complete.

Check out our full-depth video guide as well.

Samsung Galaxy A52s 5G Custom ROM: When Can We Expect?

Disclaimer:

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.

Advertisement

Fix: Samsung A52S 5G Bluetooth Not Working Problem