Redmi 10 was launched in Malaysia following numerous teasers in the past week. The device packs a quad rear camera setup and a hole-punch cutout for the selfie camera. It is powered by a MediaTek Helio G88 SoC and comes with a large battery that supports 67W fast charging.

On this page, we will share the latest Google Camera for the Xiaomi Redmi 10 and 10 Prime with you. Google camera is the stock camera app which ships with Google’s Pixel device. The camera brings the latest HDR+ technology which improves picture quality, especially on low and mid-end phones. The app also includes the Night Sight feature, portrait mode, motion photos, panorama, lens blur, 60fps video, slow motion, and more.

If you are someone who wants to install the Google Camera on your Redmi 10 and 10 Prime, then this guide is for you. Thanks to some of the creative and hard-working developers such as Arnova8G2, BSG, and Urnyx05 who’re trying hard to make ported GCam APK files to most of the devices out there. The Google Camera port is now available for the Redmi 10 and 10 Prime devices.

Also Read

Download TWRP Recovery for Xiaomi Redmi 10 and 10 Prime | Root Using It

Debloat Redmi 10, 10C and 10 Prime: Remove Bloatware and Remove ads

Will Xiaomi Redmi 10 and 10 Prime Get Android 13 (MIUI 14) Update?

Xiaomi Redmi 10 Device Overview:

The Xiaomi Redmi 10 features a 6.5-inch LCD panel with a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. It is a high refresh rate panel with a 90Hz refresh rate. It is protected by Corning Gorilla Glass 3. Under the hood, we have the MediaTek Helio G88 built on a 12nm manufacturing process. It is an octa-core processor with two Cortex-A75 cores clocked at 2.0 GHz and six Cortex-A55 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Mali-G52 MC2.

Coming to the optics, we get a quad-camera setup at the rear and a single camera at the front. The quad-camera setup at the rear consists of a 50MP primary sensor paired with an f/1.8 lens, an 8MP ultrawide sensor paired with an f/2.2 lens, a 2MP macro sensor paired with an f/2.4 lens, and a 2MP depth sensor paired with an f/2.4 lens. At the front, we get an 8MP sensor paired with an f/2.0 lens. Both the front and the rear camera setup can only capture 1080p videos at 30fps.

The Xiaomi Redmi 10 comes with Android 11 out of the box with MIUI 12.5 skin on top. There are three storage options for this smartphone: 4GB RAM + 64GB internal storage, 4GB RAM + 128GB internal storage, and 6GB RAM + 128GB internal storage. There is no microSD slot for storage expansion. In terms of connectivity, we get Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.1, GPS, Infrared port, FM radio, and USB Type-C. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, proximity, and compass. There is a 5,000 mAh battery inside this smartphone that can be charged up quickly using an 18W fast charger. The smartphone is available in three colour options: Carbon Gray, Pebble White, and Sea Blue.

Also Read: Download Google Camera 8.0 APK from Pixel 5 | GCam 8.0 APK Mod

Download Google Camera Port for Redmi 10 and 10 Prime

  • Download Google Camera 7.3.018 APK [Recommended]
  • Download Google Camera 7.3.021 APK
  • Download GCam_6.1.021_Advanced_V1.4.032219.1950: Download
  • Download GCam by Arnova8G2: Download
  • Download Google Camera Go

Steps to install Google Camera on Redmi 10 and 10 Prime

The Google Camera APK file installation process is as simple as installing any other third-party APK file. You don’t have to root your device for this.

  • Download the GCam APK file from the download link above and tap on it.
  • Make sure that the Unknown Sources option is enabled on your device. In order to do this, go to the device Settings menu > Security/Privacy > enable it. [If already enabled, skip to the installation]
  • It will launch the package installer and tap on the Install button.
  • Once the installation is done, open, and use it.
  • Enjoy!

Still, if the camera app doesn’t work, then enable the Camera2api by using build.prop (Not for every device)

Persist.vender.camera.HAL3.enable=1

I hope this guide will help you a lot and you have now successfully installed the Google Camera ported app on your Redmi 10 and 10 Prime handset. In case, if you’re facing any trouble, feel free to write it down in the comments below.